|
Spare Pin for Ambi Thumb Safety
|
|
Price $6.00
|
Qty:
|
|
H024 Henning Grip Screws: 303 Stainless Torx Small Head (Set of 2)
Small Profile Head, Head Diameter 0.225" which fits all grips
|
|
Price $10.00
|
Qty:
|
|
2.5 Screws for Scope Mount (pack of 4)
|
|
Price $6.00
|
Qty:
|
|
2.5S Screw for Alex Mount (stainless - per screw)
|
|
Price $2.00
|
Qty:
|
|
2.5B Screw for Barry Scope Mount (blued - per screw)
(Long Screw measures 4mm x .7 x 10mm )
|
|
Price $2.00
|
Qty:
|
|
3.2 Trigger Pin
|
|
Price $5.00
|
Qty:
|
|
| 3.3 Trigger Return Spring for Flat Trigger System 0.015" W.D. |
|
Price $6.00 |
Qty:
|
| 3.3 Trigger Return Spring for Flat Trigger System 0.016" W.D. |
|
Price $6.00 |
Qty:
|
| 3.3 Trigger Return Spring for Flat Trigger System 0.017" W.D. |
|
Price $6.00 |
Qty:
|
| 3.3 Trigger Return Spring for Flat Trigger System 0.018" W.D. |
|
Price $6.00 |
Qty:
|
|
|
3.3S Trigger Spring for Single Action (0.030" wire dia.)
|
|
Price $8.00
|
Qty:
|
|
3.3D Trigger Spring for Double Action (0.034" wire dia.)
|
|
Price $8.00
|
Qty:
|
|
3.6 Trigger Bar Pin
|
|
Price $5.00
|
Qty:
|
|
| 3.7 Trigger Plunger Spring 0.018 (#18). Lightens trigger pull ! |
|
Price: $8.00 |
Qty:
|
| 3.7 Trigger Plunger Spring 0.019 (#19). Lightens trigger pull ! |
|
Price: $8.00 |
Qty:
|
| 3.7 Trigger Plunger Spring 0.020 (#20). Lightens trigger pull ! |
|
Price: $8.00 |
Qty:
|
| 3.7 Trigger Plunger Spring 0.021 (#21). Lightens trigger pull ! |
|
Price: $8.00 |
Qty:
|
| 3.7 Trigger Plunger Spring 0.022 (#22). Lightens trigger pull ! |
|
Price: $8.00 |
Qty:
|
|
|
3.9 Trigger X-Long Over-Travel Screw (blued finish)
|
|
Price $5.00
|
Qty:
|
|
3.9 Trigger X-Long Over-Travel Screw (stainless finish)
|
|
Price $6.00
|
Qty:
|
|
4.2 Hammer Pin for Gold Team, Limited models (factory)
|
|
Price $6.00
|
Qty:
|
|
H042 Henning Hammer Pin : Hardened 416 Stainless, Oversized
Enhances Trigger Pull by holding hammer tightly in frame. Left OD 0.177" and Right OD 0.147". Will require to ream the hammer hole and frame's hammer holes. Due to inaccuracy in factory parts and frames, it's necessary to go to the biggest diameter to achieve a perfect hammer to frame fit. Hammer pin fits Gold Team/Custom, Limited, Stock II , Hunter, Gold Match. The other benefit of this pin is that it won't wear like the factory pin does, causing the hammer to wobble and give inaccurate trigger pulls.
|
|
Price $15.00
|
Qty:
|
| H1470 Reamer #26 (0.1470") for H042 Hammer Pin. The hammer pin is oversized to fit tight in all frames. The frames' holes vary and so does the hammer holes. To be able to install the hammer pin and get the best possible trigger, you will need to use this reamer to open the hole in the hammer and on the right side of the frame (small hole).
|
|
Price $14.95
|
Qty:
|
|
4.2 Hammer Pin for Stock, Match, Steel and older models
|
|
Price $5.00
|
Qty:
|
|
4.3 Hammer Spring (Factory - 16 lb)
|
|
Price $8.00
|
Qty:
|
|
4.3 Wolff 13lb Hammer Spring (Good for Single Action)
|
|
Price $6.95
|
Qty:
|
|
4.3 Wolff 14lb Hammer Spring (Good for Single Action)
|
|
Price $6.95
|
Qty:
|
|
4.3 Wolff 15lb Hammer Spring (Lightest choice for Double Action)
|
|
Price $6.95
|
Qty:
|
|
4.3 Wolff 16lb Factory Hammer Spring
|
|
Price $6.95
|
Qty:
|
|
4.3 Wolff 18lb Hammer Spring
|
|
Price $6.95
|
Qty:
|
|
4.4 Hammer Strut
|
|
Price $12.00
|
Qty:
|
|
4.5 Hammer Strut Pin
|
|
Price $5.00
|
Qty:
|
|
H046 Henning Hammer Pin Pin : Hardened 416 Stainless
Quality pin that doesn't wear, break or fall out. Designed with a relief cut to enable easy disassembly. This Hammer Pin Pin fits Gold Team, Limited, Stock II, Hunter , Gold Match
|
|
Price $8.00
|
Qty:
|
|
4.9 Hammer Interruptor Pin
|
|
Price $5.00
|
Qty:
|
|
5.3 Firing Pin Spring
|
|
Price $6.00
|
Qty:
|
|
5.4 Firing Pin Stop
|
|
Price $18.00
|
Qty:
|
|
5.5 Firing Pin Safety Plunger
|
|
Price $8.00
|
Qty:
|
|
5.6 Firing Pin Safety Spring
|
|
Price $5.00
|
Qty:
|
| 6.7 Henning Mag Catch Plunger (Hardened 416 Stainless Steel) |
|
Price $6.00 |
Qty:
|
|
6.8 Mag Catch Spring
|
|
Price $9.50
|
Qty:
|
|
6.10 Magazine Well Screw (Factory Blued Finish)
|
|
Price $5.00
|
Qty:
|
|
6.10 Henning Magazine Well Screw : Stainless
|
|
Price $6.00
|
Qty:
|
|
8.3 Recoil Spring (Factory 5.59kg)
|
|
Price $8.00
|
Qty:
|
|
8.3 Wolff 6lb Recoil Spring (120 < 140 PF loads)
|
|
Price $7.95
|
Qty:
|
|
8.3 Wolff 8lb Recoil Spring (140 < 160 PF loads)
|
|
Price $7.95
|
Qty:
|
|
8.3 Wolff 10lb Recoil Spring (160 < 180 PF loads)
|
|
Price $7.95
|
Qty:
|
|
8.3 Wolff 12lb Recoil Spring (180 < 200 PF loads)
|
|
Price $7.95
|
Qty:
|
|
8.3 Wolff 14lb Recoil Spring
|
|
Price $7.95
|
Qty:
|
|
8.3 Wolff 16lb Recoil Spring
|
|
Price $7.95
|
Qty:
|
|
8.3 Wolff 18lb Recoil Spring
|
|
Price $7.95
|
Qty:
|
|
8.3 Wolff 20lb Recoil Spring
|
|
Price $7.95
|
Qty:
|
| 8.3 Henning 10.75lb USPSA / IPSC Major Power Factor Recoil Spring |
|
Price $9.95
|
Qty:
|
H092 Henning Sear Pin : Hardened 416 Stainless
Enhances Trigger pull by holding sear tightly in sear block. OD 0.120". May require to ream the sear hole and the sear housing hole to allow for this 'oversize' pin. Due to inaccuracy in factory parts it's necessary to go to the biggest diameter to achieve a perfect sear to sear housing fit. Sear pin fits all EAA/Tanfoglio models
|
|
Price $12.00
|
Qty:
|
| H1200 Reamer #31 (0.1200") for H092 Sear Pin. The sear pin has a 0.120" diameter. The sear and sear housing varies greatly, from 0.116" - 0.120". To be able to install the sear pin and get the best possible trigger, use this reamer to open the holes in the sear and sear housing to the same dimension as the pin. |
|
Price $14.95
|
Qty:
|
|
|
|
Price $8.00
|
Qty:
|
|
10.4 Supersight Screw
|
|
Price $8.00
|
Qty:
|
|
11.2 Extractor Pin
|
|
Price $5.00
|
Qty:
|
| 11.3 Henning Extractor Spring (New December 2009!) |
|
Price $5.95 |
Qty:
|
|
11.3 Wolff Extra Power Extractor Spring (25% stronger)
|
|
Price $5.95
|
Qty:
|
|
18.3 Slide Stop Pin Spring
|
|
Price $8.00
|
Qty:
|
|
18.4 Slide Stop Pin Spring Pin
|
|
Price $5.00
|
Qty:
|
|
 |
|
|
