Disassembling & Assembling the Witness Elite Limited Frame
These two videos show you how to completely disassemble and re-assemble all the parts in the frame. It'll also give you a little more insight into the internals of the EAA pistol. There are several hard learned tricks in these videos that will save you a lot of time.
Warning! This is not something you should attempt unless you have confidence in your technical skills. I recommend watching the videos several times before attempting disassembly until you have a good understanding of what to do. Don't send your gun in parts to me... Got it? Wear eye-protection!
Also, that being said. The frame does not need to be disassembled to clean it. You can clean the inside of the frame simply by spraying it with brake cleaner to get all the dirt out. Follow up with a rag and re-lube using a light oil.
Before you do this, make sure you have all the tools needed:
1/16" Pin Punch
Very Small Flat-Tip Screwdriver
Gunsmith Hammer
Needle Nose Pliers
Cleaning Rag
Q-Tips
Light Gun Oil
Slide-Glide #1
Brake-Cleaner
Tech